Environics IUT Medical ENVI-Air GC-IMS-Analyzer Ultra-Low Level Gas Detection SKU: 2358 Manufacturer: Environics-IUT Model: ENVI-Air GC-IMS-Analyzer S/N: IM0911.120011 YoM: 2012 Description: The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air. It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance. The ENVI-Air can detect hazardous gases at far lower concentrations than traditional analyzers and react in real-time. This gives the operator a longer safe response window to take corrective action. It is based on GC-IMS technology. Ion Mobility Spectrometry (IMS) is a simplified atmospheric pressure time-of-flight technique that is highly selective with low ppb to % sensitivity. The GC-IMS adds multi-component separation prior to the IMS analysis. ENVI-Air does not require the use of paper tape, pre-concentrators or chemical reagents. The ENVI-Air is an industrial solution virtually drift free and unaffected by humidity or temperature changes and will be factory calibrated for the compounds of interest for maximum accuracy and reliability. Because of the simplicity of design and limited moving parts, ENVI-Air analyzers will have the lowest maintenance and downtime of any current analyzer system. Measurable Compounds: Ammonia, Acetone, Acrylonitrile, Acetonitrile, Arsine, Benzylchlorid, Bromine, Chlorine, Chlorocyane, BTX, CMME, Ethylene Oxide, Dibutylphthalat (DMP), Dimethylsulfat, HFPO, Hydrazin, Hydrogen Chloride, Hydrogen Bromide, Hydrogen Fluoride, Hydrogen sulfid, TDI, Methyl Bromide, Isopropyl alcohol, Methyl Iodide, Nitrogen dioxide, NMP, PFIB, Phosgene, Phosphine, PGME, PGMEA, Sulfur Dioxide, Triethylamine, Vinyl Chloride. Areas of application: - Oil and Gas Production - Plastics Manufacturing - Semiconductor Fabrication - Chemical Production - Pharmaceutical Manufacturing - Gas Pipeline Safety - Medical Sterilization - Primary Metal Processing Specifications: - Detection Principle: Gas Chromatography - Ion Mobility Spectrometry (IMS) - Ionization: Tritium (3H) No Licence or Wipe Tests Required - Sensitivity: Low ppb range - Moisture: 0% to 90% RH - Warm Up Time: 20 minutes - Measurement Time: Seconds - Power: 220 VAC/19VDC - Carrier Gas: No Carrier Gas Required - Operation Temperature: -10°C to +50°C - Storage Temperature: -40ºC to +50ºC - Enclosure: 19” Rack Mount - Power: 220 VAC/19VDC - Dimensions (L x W x H): 483 x 381 x 89 mm - Weight: 6.44 kg Items delivered: - Environics-IUT ENVI-Air GC-IMS-Analyzer - Instruction manual Condition: The item is in perfect coasmetic as well as operarting condition. It is 100% functional teasted and ready to be used.